Solutions for UV Light Measurement

 

 

Home

  Fibre optics
 

About Us

 


High intensity Ultra Violet radiation is a critical ingredient in the manufacturing process for quartz optical fibre and cable in the following four areas:

bullet

fibre draw.

bullet

fibre coloring.

bullet

fibre ribbon matrix.

bullet

fibre cable non-ferrous strength member.

In fact, the absolute intensity and wavelength distribution of the UV reaching the process during manufacture can be a critical limiting factor on process speed, however, fibre draw process speeds in excess of 20m/sec are not uncommon. If it is not taken into account, inadequate UV irradiation during the manufacturing process may lead to inadequate cure, which if not detected can lead to severe product quality in-service problems, premature failure, or loss of performance of the fibre once installed.

For more details about UV in the production of Optical Fibre see our :

Application notes

Sola-Check System Brochure for Fibre Optics.

Sola-Check System Products page.

 

News

Contact Us

Products

Sola-Check System

Sola-Check

Sola-Sure System

Sola-Sure

Sola-Scope

ARAD-100

Accessories

Applications

UV Curing

Medical Physics

Solariums

Fibre optics

Photobiology

Disinfection

Services

Calibration

Tech Support

Training

FAQ

Publications

Links

 
 

Solatell Ltd

Home | Products | Applications |  Contact US